Embedian pioneered the concept of an extremely small computer-on-module and single board computers with full implementation of major operating systems, and we are the leading supplier in this industry now.
We continue to provide some of the most innovative and modulized design and production solutions to our customers who design and build small devices. Embedian technology portfolio lowers costs, and gets our customers’ products to market ahead of their competition.
The Embedian Developer Center brings all of our developer resources together in one place. This is a place where our team collaborates and shares knowledge with all developers.
Embedian is pleased to announce we are now an approved member of the Texas Instruments (TI) Design Network.
This officially recognises our expertise in electronics and software design, in particular ...
Open Standard, Low-Cost SMARC-based SBC near USD $100
2016-06-28 00:57:25
Embedian today introduces a new breed of SBCs: the SMARC-based SBC. This hybrid approach combines a SMARC COM for the CPU engine with a baseboard for the I/O and application interface. This two-board ...
Embedian Inc., a leading manufacturer in the embedded computer modules market, today announced that it has established its presence in the Japanese market by adding JEPICO Corporation, a Japanese embe...
Embedian today announced to support newly defined Computer-on-Module (COM) standard for their upcoming ultra low-power embedded architecture platform family. Supporting the new COM standard marks a si...
* On-line purchase offers convenience at sample development stage. For a larger number of orders, please click "Request for Quotation" at left-hand side of this page. We will offer much better discount price.
Please Choose:
SMARC-FiMX6-S
SMARC-FiMX6-U-1G
SMARC-FiMX6-D-2G
SMARC-FiMX6-Q-2G
SMARC-FiMX6-S-I
SMARC-FiMX6-D-2G-I
SMARC-FiMX6-Q-2G-I
SMARC-FiMX6-S-I-C
SMARC-FiMX6-D-2G-I-C
SMARC-FiMX6-Q-2G-I-C
The default pricing is based on i.MX6 Dual Core running at 1GHz. For industrial temperature(-40oC ~ 85oC) products, only SOLO core, Dual core and QUAD core are supported.
The highly scalable Embedian SMARC-FiMX6 modules with single, dual lite, dual or quad core NXP(Freescale) i.MX6 processors cover an extremely wide performance range. Based on the ARM Cortex A9 technology, they support a huge variety of industry standard interfaces, while at the same time providing advanced multimedia and high speed connectivity making it suitable for an almost unlimited number of applications.
SMARC-FiMX6 supports both SMARC 1.0 AND SMARC 1.1 standards.
Technical Information
Part Number
1: S (Solo Core running up to 1GHz and 512MB DDR3L memory) U (DualLite Core running up to 1GHz) D (Dual Core running up to 1GHz) Q (Quad Core running up to 1GHz)
2: 1G (1GB DDR3L memory) 2G (2GB DDR3L memory, only for Dual and Quad Core) Leave it Blank for Solo Core
3: I: Industrial temperature (-40oC ~ 85oC), only support CPU running up to 800Mhz; Leave it Blank for commercial temperature.
4: C: Conformal coating, only support industrial temp. variants; Leave it Blank if you do not need it.
Note: SMARC-FiMX6 supports both 1.8V (SMARC 1.1) AND 3.3V (SMARC 1.0) VDDIO. (automatically detected according to carrier board)
Example: SMARC-FiMX6-D-1G: Dual Core SMARC-FiMX6 module with 1GB DDR3L in normal temperature.
Compliance
SMARC 1.0 _and_ SMARC 1.1 (same P/N)
Dimension (W x L)
82mm x 50mm
CPU
NXP (Freescale) i.MX 6
Solo, Dual Lite, Dual and Quad Core
1GHz (Industrial Temp.: 800Mhz)
Main Memory
1GB DDRL (Dual Lite, Dual and Quad) or 2GB DDR3L (Dual and Quad only)
512MB DDR3 (Solo)
8GB eMMC (5.0) onboard
4MB SPI NOR Flash onboard
AT24C32 EEPROM onboard
Graphic Controller
Dual Display
HD 1080p Encode/Decode
2D/3D h/w Acceleration
Display Interfaces
24 bit parallel RGB LCD data and control signals
Single channel 18 or 24 bit LVDS LCD or dual channel LVDS LCD
Panel support signals (I2C, Power Enables, PWM)
2nd LVDS channel may be implemented on Carrier board
Support for dual channel implementations
One HDMI port
MIPI/Serial Camera Interfaces
Serial configuration: CSI (4 lanes)
SDIO Interfaces
Two SDIO interfaces
4 bit SDIO card interface with support lines
8 bit eMMC interface with support lines
SPI Interfaces
Two SPI interfaces
I2S Interfaces
One I2S interface
Typically used for connection to I2S audio CODECs
SPDIF Interfaces
One SPDIF interface
SPDIF_IN and SPDIF_OUT available for audio use
I2C Interfaces
Four I2C interfaces
Power Management
General Purpose
Camera
LCD Display ID
HDMI interface also has private I2C interface for HDMI use
Asynchronous Serial Port (UART) Interfaces
Four asynchronous serial ports
Two with 4 wire handshake (RXD, TXD, RTS#, CTS#)
Two with data only (RXD, TXD)
Logic level signals
CAN Bus Interfaces
Two CAN bus interfaces
Logic level signals from Module based CAN bus protocol controllers
RXD, TXD only
Two Module GPIOs are designated for optional use as CAN bus error status inputs
USB Interfaces
Two USB Ports allow USB 2.0 Host operation (Full Speed and High Speed)
One port allows USB 2.0 OTG (USB client or host)
USB support signals (VBUS enable / Over-current detects, OTG support signals)
PCI Express
One PCIe x 1 link
PCIe Gen2
Reference Clock Pair
Full set of PCIe support signals (CLKREQ#, PCIE_RESET#, presence detects)
Could be configured as PCIe target
Common PCIe wake signal
SATA Interface (Dual and Quad core only)
One SATA interface
SATA Gen2
Gigabit Ethernet
One analog GBE MDI interface (Qualcomm Atheros AR8035 PHY onboard)
No magnetics on Module
LED support signals
CTREF (center tap reference voltage) for Carrier magnetic
Watchdog Timer Interfaces
Real-Time Clock
External Seiko S35390A onboard
General Purpose I/O
Twelve GPIO signals
Specific alternate functions are assigned to some GPIOs
PWM / Tachometer capability
Camera support
CAN Error Signaling
HD Audio reset
System and Power Management Signals
Reset out and Reset in
Power button in
Power source status
Module power state status
System management pins
Battery and battery charger management pins
Carrier Power On control
Power Consumption (Typical)
Solo Core (512MB DDR3L): 1.55W
Dual Lite Core (1GB DDR3L): 2.2W
Dual Core (1GB DDR3L): 2.5W
Quad Core (1GB DDR3L): 3.6W
Boot Source Select
Three pins to allow selection from Carrier Board
Select options to include boot from one of the following:
Module SPI
Module eMMC Flash
Module NOR Flash
Module Remote Boot (Network Port)
Carrier SPI
Carrier eMMC
Carrier SD Card
Carrier SATA
Power Supply
3V to 5.25V:
Operates directly from single level Lithium Ion cells, or fixed 3.3V or 5V power supply
Software
Linux and Android:
Based on NXP (Freescale) imx_4.14.98_2.0.0_ga, imx_4.9.88_2.0.0_ga, imx_4.9.11_1.0.0_ga, imx_4.1.15_1.0.0_ga and imx_3.14.28_1.0.0_ga
Yocto Project Support
Ubuntu 14.04/16.04 and Debian 9 Support
Android 7.1.2_2.0.0 (Nougat) and Android 6.0.1_2.1.0 (Marshmallow) Support
LVDS, VGA DSUB15 (from 24-bit parallel LCD) and HDMI connector
1 x 10/100/1000Mbps RJ-45 connector
2 x RS232/422/485 DSUB9 connector, 2 x RS232 2.0mm Header
2 x USB host 2.0 type A connector, 1 x mini USB client connector
1 x PCIe connector, 2 x mini PCIe connector
2 x CAN BUS header, 1 x 2x7-pin GPIO header, Audio Mic. in and Speaker out Audio Jack
2 x I2C header (for capacitive touch), 4 x SPI header, 1 Camera/MIPI header
1 x SDHC connector, 1 x on-carrier-board eMMC flash
A single 4KB EEPROM is provided on I2C0 that holds the board information. This information includes board name, serial number, and revision information.
1 x external watchdog reset
jumpers for LCD 3.3V or 5V voltage, boot selection, RS232 or RS485 selection, SMARC 1.0 or SMARC 1.1 selection
Form factor: 170mm (L) x 170mm (W) (mini-ITX form factor)
Customers who bought this product also purchased...
Corporate
Log In
Ask a Product Question
+886.2.2722.3291
Email Us
eniac50 